Environmental, Social and Governance Policy
1 Introduction
1.1 Purpose
This document presents Getronics’ policy for Environmental, Social and Governance as advocated by Standard ISO 26000, Guidance on Social Responsibility. Getronics also reports against the Sustainability Accounting Standards Board (SASB) reporting standards.
This policy applies to Getronics colleagues, contractors, business units, offices, data centres, service delivery activities, procurement activities and supplier relationships, where these activities are within Getronics’ operational control or where Getronics can reasonably influence outcomes through contractual, governance or supplier engagement mechanisms.
ESG is defined as the environmental, social and governance responsibility of an organisation for the impacts of its decisions and activities on society and the environment, through transparent and ethical behaviour that:
- Contributes to sustainable development, including the health and welfare of society
- Takes into account the expectations of stakeholders
- Is in compliance with applicable law and consistent with international norms of behaviour
- Is integrated throughout the organisation and practiced in its relationships
Standard SA8000, Social Accountability (published by Social Accountability International) also covers much of the scope of ISO 26000, with its emphasis on human and employment rights and health and safety in the workplace. However, Getronics has adopted ISO 26000 as it also focusses on community interests and environmental matters ISO14001, which are important additional aspects of its operations.
1.2 Environmental Social and Governance Responsibility Framework
As defined within ISO 26000, a social responsibility framework needs to consider the following key elements:
- Stakeholders: those people or groups that are affected by the organisation’s actions, and can include workers, customers, suppliers, community residents, and investors
- Environmental Social and Governance Disclosure Topics: core subjects that the organisation needs to focus upon to ensure a socially responsible strategy - these include organisational governance, human rights, labour practises, environment, fair operating practices, consumer issues community involvement, etc.
- Reporting: communicating to stakeholders the organisation’s level of achievement of its policies and initiatives for promoting social responsibility and the status and results of improvement activities
Getronics has adopted this framework for its approach to social responsibility; the next page contains a social responsibility policy statement in support of this.
1.3 Getronics’ Environmental, Social and Governance Responsibility Policy Statement
Getronics takes its social responsibility seriously and has adopted several principles that form the foundation for a socially responsible behaviour of the Company:
- Accountability: Getronics is answerable for the overall impact of its decisions and activities to those affected and to society in general
- Transparency: Getronics will disclose to interested parties the policies for which it is responsible and ensure that its decisions and activities will not be detrimental to society
- Ethical behaviour: Getronics’ behaviour is based on the ethics of honesty, equality and integrity
- Respect for Stakeholder Interests: Getronics will consider the interests of internal and external parties that may be impacted by its decisions and activities
- Respect for the Rule of Law: Getronics will comply with applicable laws and regulations and will ensure that its staff are aware of appropriate legislative requirements
- Respect for International Norms of Behaviour: Getronics respects international norms of behaviour and will not benefit from unfair acts
- Respect for Human Rights: Getronics respects and encourages rights set out in the International Bill of Human Rights.
To support these principles, Getronics has established a few policies and procedures that are published within its management systems to ensure ethical, socially acceptable, environmentally responsible, and legally compliant working practices.
2 Getronics’ Environmental, Social and Governance Responsibility Values
Getronics has adopted the Environmental Social and Governance responsibility framework stated previously, with values that are described within the sections below that include examples to illustrate how Getronics addresses its social responsibility values.
References to further information, policies, or processes that are contained within its management systems are also included. The main one of these is a Policies & Procedures portal that is available to all colleagues and contains management system operational policies and processes and provides links to other portals, such as HR Policies.
2.1 Stakeholders
Getronics’ main stakeholders that can be affected by the organisation’s actions are:
2.1.1 Colleagues who have an employment contract
Throughout their terms of employment with Getronics, all colleagues who have an employment contract with Getronics and contractors are subject to a set of policies and processes to ensure that they are treated fairly, they treat others fairly, and they understand the Company’s policies and expectations in their conduct and its legal and social responsibilities.
This commences with the new starter process that covers recruitment, pre-employment vetting, employment contract including terms and conditions, and provision of formal company induction.
During employment, regular performance reviews and objective setting are undertaken.
Some of the policies and processes that apply to colleagues include:
- Joiners, Movers, Leavers Process
- Bullying and Harassment Policy
- Disciplinary Policy and Procedure
- Flexible Working Policy
- Grievance Policy and Procedure
- Maternity Policy
- Parental Leave Policy
- Paternity Leave Policy
- Performance Improvement Policy
- Attendance Management Policy
- Working Time Regulations
- Equal Opportunities and Diversity Policy.
2.1.2 Customers
Getronics provides managed services to its customers, which can include managed cloud provision, data centre hosting services, provision of service desks, mobile break-fix, IT infrastructure support, desktop support, and service delivery management. Each customer account has a Client Manager/Director and a Customer Success Manager (CSM) assigned to ensure that the requirements of the contract are fully met, and that customer satisfaction and service improvement are key considerations.
Processes that apply to the provision of customer services are delivered under the Company’s ISO 9001 (Quality Management) and ISO 20000 (IT Service Management) registered management systems and include:
- Customer Complaints Process
- Getronics Service Management Plan
- Business Relationship Management Process
- Continual Service Improvement Programme Process
- Customer Satisfaction Process
- Operational Escalation Process
- Service Level Management Process.
2.1.3 Partners and Suppliers
This group primarily includes members of the Getronics Workspace Alliance (GWA), which is an alliance of a number of global IT service providers. The GWA is designed to combine the value of experienced national providers with a consistent international service methodology, with a specific focus on workspace outsourcing.
It also includes suppliers of services directly to Getronics, which are required to comply with a supplier code of conduct to operate in a socially responsible manner; this is backed up by performance reviews carried out by the Procurement Team as defined in:
- Procurement Policy.
2.1.4 Community Residents
Getronics operates from several locations globally, mainly within office environments; in many cases, they are located within business parks.
However, Getronics endeavours to minimise its impact on its community, by restricting the use of outside lighting, ensuring that any CCTV systems in operation do not overlook beyond premises boundaries and ensuring that noise levels are kept to a minimum.
2.1.5 Investors
Getronics is owned by the Kennic Trust and various investors and is not a publicly listed company.
However, Getronics needs to operate in an economically viable manner to achieve EBITDA targets and satisfy its stakeholder expectations. Getronics has invested in the development of next-generation IT services, such as the provision of its cloud-based managed services, as well as providing IT service management and hosting services.
2.2 Disclosure topics
Getronics focuses on the following core disclosure topics as part of the Environmental, Social and Governance strategy. Disclosure topics are publicly reported on yearly and closely monitored through specific KPIs during the reporting timeframe.
2.2.1 Environment Disclosure Topics
3.2.1.1. Carbon footprint
Carbon footprint refers to the amount of carbon dioxide released into the atmosphere because of the activities of a particular organization. Carbon footprint disclosure topic includes Scope 1,2 & 3 emissions. Scope 1 and 2 emissions cover everything that is in Getronics direct operational control such as:
- Scope 1 e.g.: Fuel Combustion, Owned transport, Process emissions, Fugitive emissions
- Scope 2 e.g: Purchased electricity, heat and steam
Scope 3 emissions cover emissions outside of own operations, and not the result of activities from assets owned or controlled by Getronics, but by those that it's indirectly responsible for, up and down its value chain.
Getronics is committed to calculating a reasonable Carbon footprint based on real time data such as e.g.: electricity bills, owned transport mileage and fuel consumption, etc; where such data is in our direct control. Getronics also operates in managed service type of offices where there is no visibility or control on direct consumption, nonetheless we strive to minimise our carbon footprint in such environments.
Getronics is committed to engaging with our suppliers to provide accurate data for Scope 3 emissions.
Carbon footprint emissions target
Alongside our quarterly monitoring, we're continuing to build out our long-term carbon reduction strategy.
Getronics is committed to cutting emissions across Scope 1, 2 and 3 between 2026 and 2030. Building on the 27% reduction in carbon intensity we achieved in 2025, we're aiming to align with a 1.5°C pathway following SBTi guidelines.
By 2030, our objective is to achieve a 4% reduction in total carbon emissions year-on-year, including minimum absolute emissions reductions of 4.2% year-on-year across Scope 1 and Scope 2 and 2.5% year-on-year across Scope 3, sustained over the next five years. We aim to focus on energy efficiency improvements, sustainable facilities management practices, circular IT practices and strengthened supplier engagement.
3.2.1.2. Waste, including e-waste
Waste, including e-waste, includes the processes and controls required to prevent, reduce, reuse, recycle, recover and responsibly dispose of waste generated through Getronics’ operations and the delivery of IT services. As an IT services company, Getronics recognises that electronic equipment, including laptops, desktops, servers, networking equipment, monitors, mobile devices, batteries, cables, peripherals and data-bearing assets, can create environmental, regulatory and information security risks if not managed responsibly at end of life. Getronics is committed to applying a waste hierarchy approach, giving priority to waste prevention, equipment life extension, reuse, refurbishment, redeployment and certified recycling before disposal.
Getronics seeks to minimise waste generation across offices, data centres and service delivery activities by promoting efficient resource use, digital processes, responsible procurement and circular IT asset management. Where equipment is no longer required, Getronics aims to prioritise internal redeployment, repair, refurbishment, resale, donation or supplier take-back schemes, provided that such actions meet applicable legal, contractual, data protection and information security requirements.
All e-waste and other regulated waste will be handled in accordance with applicable local, national and regional legislation, including requirements for hazardous waste, waste electrical and electronic equipment, extended producer responsibility and safe transportation, where relevant. Getronics will engage only authorised, licensed or appropriately certified waste processors and IT asset disposition providers, where such services are available, and will seek evidence of responsible treatment, recycling, recovery or disposal. This may include waste transfer notes, recycling certificates, destruction certificates, chain-of-custody records and other documentation required to support ESG reporting and auditability.
For IT assets containing business, customer, colleague or other confidential data, Getronics will ensure that data sanitisation, media wiping or physical destruction is performed before reuse, resale, recycling or disposal, in line with applicable information security and data protection requirements. Asset retirement processes should maintain traceability from collection through to final treatment, including records of asset type, quantity or weight, disposal route, reuse or recycling outcome and responsible supplier.
Getronics monitors waste produced data points such as total waste generated, waste recycled or diverted from landfill, landfill waste, hazardous waste and e-waste, where such data points are in our direct control or are made available by landlords, suppliers or waste processors. As part of continuous improvement, Getronics will seek to improve data quality and reporting coverage across its reporting units and will engage suppliers, facilities partners and service providers to support accurate waste and e-waste disclosure. Our KPIs include total waste generated, waste recycled; percentage diverted from landfill; hazardous waste safely treated; and certificates received for responsible disposal.
Getronics will continue to promote awareness among colleagues and relevant business owners regarding waste segregation, responsible disposal of electronic equipment, secure return of end-user devices and the use of approved disposal channels. Through its environmental management approach, procurement practices and supplier engagement, Getronics aims to reduce environmental impact, support circular economy principles, protect confidential information and strengthen the reliability of its ESG disclosures. Based on reported performance over the last two years, Getronics is committed and aims to recycle or divert from landfill at least 80% of waste generated, where waste management is within our direct control.
3.2.1.3. Water Conservation
Water conservation refers to the practice of using water efficiently to reduce unnecessary water usage.
Getronics monitors water consumption data in the locations where direct supplier contracts for water supply are in place. Getronics is committed to minimize water consumption in all water stress areas where it operates by engaging in discussions with landlords over measures that can be implemented to facilitate water consumption reduction and by training its staff on responsible water consumption.
3.2.2. Social Disclosure Topics
3.2.2.1. Data privacy
Data privacy refers to proper handling of sensitive data including, notably, personal data but also other confidential data, such as certain financial data and intellectual property data, to meet regulatory requirements.
Getronics recognises that the correct and lawful treatment of Personal Data will maintain confidence in the organization and will provide for successful business operations critical responsibility that we always take seriously.
Getronics Data Protection Policy is kept under regular review and does not override any applicable national data privacy laws and regulations in countries where the Company operates.
The Group processes 3 main types of personal and confidential data:
- Colleagues who have an employment contract with Getronics and contractor personal data.
- Customer personal data (i) collected for our own use e.g contract and billing and (ii) for data processing via the provision of the Portfolio services.
- Other stakeholders (i) Marketing data of prospective customers (ii) vendor data.
3.2.2.2. Data security
Data Security refers to protecting digital information from unauthorized access, corruption, or theft throughout its entire lifecycle.
Getronics upholds the Information Security Management System (ISMS) policy at Group Level as part of the ISO 27001:2013 certification.
The Information Security Management System (ISMS) policy requires that Getronics ISMS reliably delivers the appropriate IT services, establishing guidelines and procedures necessary to ensure security confidentiality, integrity, availability and privacy of the information and data.
Getronics is committed to following best practices and standards within the industry. For this purpose, various certifications are maintained. These can be found at: https://www.getronics.com/policy-pages/iso-itil/. Business partners and description can be found here: https://www.getronics.com/partners/
3.2.2.3. Inclusion, Diversity and Equal Opportunity
Inclusion, Diversity and Equal Opportunity refer to fair treatment and opportunity for all colleagues while eradicating prejudice and discrimination based on an individual or group of individual's gender, race, sexual orientation, religious beliefs, and the practice of ensuring that people feel a sense of belonging and support from the organization.
At Getronics we want to celebrate diversity across all parts of the business. Our objective is to build a “safe” place for our staff by creating an open, respectful, empathic, fair, and inclusive place to work. When considering this topic, we closely monitor aspects such as recruiting, pay, career growth, reward systems, management behaviour, and much more.
3.2.2.4. Employee Wellbeing & Engagement
Employee Wellbeing & Engagement refers to colleague wellness, including physical health, emotional or psychological well-being, community or social relationships, and financial stability, as well as the ability for colleagues to be present, focused and engaged while feeling connected to the organization’s purpose. Getronics monitors relevant initiatives and routinely engages with colleagues to understand their level of engagement within the organization, including through employee engagement surveys.
3.2.2.5. Talent Attraction, Retention & Development
Talent Attraction, Retention & Development refers to the ability of an organization to present itself as an employer of choice and retain top talent through career growth opportunities and fair, competitive, and transparent recognition and reward systems. We closely monitor KPIs that are relevant to our capacity to attract and retain talent within the organization such as: offer acceptance rate, attrition, no hour of training, etc.
We will continue monitoring our employee turnover ratio and aim to keep our voluntary employee turnover ratio less than 15% year on year.
3.2.2.6. Fair labor practices
Fair labour practices refer to the commitment of an organization to respect standard conventions regarding workers, in matters of basic worker rights, working conditions, wages to be paid & also related to job security, in all its activities as well as when engaging with different partners or suppliers.
Getronics is committed to observing and respecting fair labor practices in accordance with the global as well as local legislation requirements in all the countries where we operate.
To ensure transparency and equality in different job roles with similar levels of seniority Getronics has adopted a job grading structure: The Job Family System Manual (JFS). All positions created within the organization are analyzed and placed within the specific job grading and remuneration and compensation are aligned with the specific job grade, while respecting local market trends and minimum wage legislation.
Getronics is committed to eradicating human exploitation from our supply chain. All Getronics suppliers must comply with the Getronics Global Code of Business Conduct as well as Supplier Code of Conduct.
Getronics engages with local labor consultancy companies or in house specialists to ensure all local labor legislation is being respected and in some of the countries, depending on organizational size we also work with workers councils, for example in France, Germany, Spain, Hungary, Belgium and Luxembourg.
In terms of job security Getronics generally engages the collaboration with its staff on indefinite work contracts with some exceptions based on the nature of the role and dictated by local legislation requirements.
3.2.2.7. Health & Safety
Health and Safety refer to regulations and procedures adopted by an organization intended to prevent accidents or injury in workplaces or to safeguard and improve the mental health of colleagues.
Getronics is committed to high standards of health and safety in all its’ locations covering all of our colleagues and governs this through Getronics Health and Safety policy. Getronics ensures that colleagues, and others, are not at risk and, as far as reasonably practicable, the working environment is safe and does not pose a risk to health. Getronics also has Safety Committee appointed to ensure compliance with these principles.
Getronics encourages colleagues and relevant stakeholders to raise concerns about unethical conduct, discrimination, harassment, human rights risks, health and safety concerns, data protection issues, environmental incidents or other ESG-related matters through appropriate reporting, grievance, whistleblowing or escalation channels. Concerns raised in good faith will be handled in line with applicable policies, confidentiality requirements and non-retaliation principles.
3.2.2.8. Community Giving
Community Giving refers to the level at which an organization is involved in community life through various acts of charity giving, volunteering and education support.
Getronics actively encourages its colleagues to participate in volunteering activities and regularly facilitates charity giving for its colleagues.
3.2.2.9. Respecting Human Rights
Respecting Human Rights refers to the level at which an organization recognizes the value of each person, ensuring their dignity, safety and health, equal working conditions and promoting diversity.
Getronics endeavors to treat all individuals with respect and it ensures that it complies with all laws that apply to human rights, typically including:
- Equal Pay
- Disability Discrimination
- Sex Discrimination
- Race Relations
- Employment Equality
The adoption of fair employment practices, ensuring safe working environments for colleagues and customers, and providing living wages to its colleagues, is fundamental to Getronics’ operation. Our supporting policies include:
- Bullying and Harassment Policy
- Flexible Working Policy
- Grievance Policy
- Working Time Regulations Policy
The Company operates Works Councils or Employee Consultative Forums as appropriate, with members representing a cross-section of the workforce to ensure that colleagues’ concerns are communicated to Management and that Company policy changes and plans are discussed and reviewed before wider publication.
3.2.2.10. Responsible sourcing
Responsible sourcing is Getronics’ commitment to integrate environmental, social, ethical and governance considerations into procurement decisions and supplier relationships, proportionate to the category, country, spend, criticality and identified risk. This approach applies across the supplier lifecycle, including sourcing, due diligence, selection, contracting, onboarding, performance monitoring, corrective action and renewal or exit decisions.
Getronics’ supplier selection is governed by the Procurement Policy and led by the Vendor Management Organization in collaboration with the business requestor and relevant control functions.
Sustainability criteria should be included, where proportionate and relevant, in requests for proposals, supplier evaluations and approval decisions. These criteria may cover environmental management, greenhouse gas emissions, circular IT and e-waste practices, labour and human rights, health and safety, diversity and inclusion, business ethics, data protection, information security and supply-chain transparency.
For the purposes of this policy, the in-scope supplier population comprises new, renewed, key strategic and critical suppliers selected through documented criteria that consider procurement spend, category, country, service criticality, access to Getronics or client data and systems, subcontracting exposure, and environmental, labour and human rights, ethics and governance risk. Procurement will document the segmentation methodology, applicable thresholds, exclusions and approved exceptions to ensure consistent implementation and reporting.
Before onboarding and periodically thereafter, Getronics will apply proportionate sustainability due diligence to suppliers based on documented risk segmentation and business relevance. Higher-risk and critical suppliers may be required to complete sustainability questionnaires, provide supporting policies, certifications, audit reports or performance data, disclose relevant subcontracting risks, or undergo an independent sustainability assessment. Reassessment frequency and evidence requirements will reflect supplier risk, criticality and material changes. Where gaps are identified, Getronics will agree corrective actions, responsibilities and target dates with the supplier, retain evidence of follow-up, monitor completion and escalate material, repeated or overdue non-conformance. Suspension, restricted sourcing or termination may be considered in accordance with contractual rights, the severity of the issue and the supplier’s willingness and ability to remediate.
Getronics shall establish, review and monitor sustainable procurement objectives and key performance indicators at least annually. The Procurement Team owns implementation, supported by the ESG Team, Legal, Information Security, Data Protection and relevant business owners according to supplier risk and category. The Procurement Team will maintain evidence of implementation and performance, including the supplier segmentation methodology, assessment results, Supplier Code of Conduct acknowledgements or accepted equivalent standards, contractual ESG clauses, approved exceptions, corrective action records and supplier engagement outcomes. Progress, coverage, material risks and overdue corrective actions will be reported through defined procurement and ESG governance arrangements, with decisions and follow-up actions documented.
- By 2028, at least 80% of key strategic suppliers, measured by procurement spend and identified sustainability risk, will have completed a documented ESG risk assessment, with annual interim milestones established and reviewed from the 2025 baseline; Getronics aims to increase this coverage to 100% by 2030. An assessment is complete when the required supplier information and supporting evidence have been reviewed, a risk rating has been assigned, and any identified corrective actions have been recorded.
- From 2025, Getronics aims for 100% of new and renewed suppliers within the defined in-scope supplier population to acknowledge the Supplier Code of Conduct, or demonstrate equivalent standards accepted by Getronics, during onboarding or contract renewal. Coverage will be measured annually against the total number of new and renewed in-scope suppliers, with exclusions and exceptions documented, justified and approved through the procurement governance process.
- Effective 2025, Getronics aims to include appropriate ESG clauses in 100% of new and renewed contracts with in-scope suppliers, using risk- and category-relevant requirements.
Coverage will be calculated annually against all new and renewed in-scope supplier contracts executed during the reporting period, with approved exceptions documented, justified and reported where contractual terms cannot be amended.
- By 2028, at least 75% of critical suppliers will complete Getronics’ supplier performance and sustainability assessment, with annual interim milestones established and reviewed from the
2026 baseline. For corrective actions due within each reporting period, Getronics aims to achieve at least a 90% closure rate by the agreed target date. Overdue high-risk actions will be escalated to the designated Procurement owner and relevant control function, with decisions, revised dates and outcomes documented.
Getronics will seek to report sustainable procurement performance using consistent definitions and retained source evidence. Indicators may include the percentage of procurement spend and number of suppliers covered by ESG risk screening; the percentage of in-scope suppliers that have acknowledged the Supplier Code of Conduct or demonstrated equivalent standards; the percentage of new and renewed in-scope contracts containing ESG clauses; completion and risk-rating results of supplier sustainability assessments; corrective actions issued, due, closed on time and overdue; supplier engagement or training completed; and procurement spend with suppliers holding relevant environmental or social certifications, where applicable. KPI scope, exclusions, reporting periods and calculation methods will be documented to support year-on-year comparison and independent review.
3.2.3. Governance Disclosure Topics
3.2.3.1. Ethics & Integrity
Ethics and Integrity refer to the rules and regulations that an organization has in place to ensure the company as well as individuals within the organization work in accordance with moral principles, honesty and fairness. This topic also refers to Intellectual Property & Competitive Behavior, as well as Legislation & Regulation Adherence.
Getronics Code of Business Conduct (COBC) prevents occurrences of violence, discrimination or harassment in the workplace by raising awareness, sharing strategies and identifying when action is required and what actions to take to maintain an inclusive work environment. Our COBC includes:
- Tax evasion and money laundering;
- Bribery and corruption;
- Human rights violations;
- Discrimination, bullying or harassment;
- Retaliation and speaking up safely.
- Mitigating Anti-Corruption, Anti-Bribery, Anti-Money Laundering
At Getronics we are committed to managing and counteracting the potential risk of financial crime including bribery, tax evasion, corruption, money laundering, extortion and kickbacks through the deployment of our policies, systems, financial and other controls, training and awareness for our colleagues, which we believe is appropriate for our industry and which meets the legal and regulatory requirements.
We will continue to monitor and ensure we attain 100% of employees complete training Getronics Code of Business Conduct on anti-discrimination and harassment policies by end of 2027.
3.2.3.2. Enabling Clients’ Sustainability
Getronics is committed to supporting clients in improving the environmental performance of their IT environments and digital operations within the agreed scope of services. Sustainability considerations will be integrated, where relevant and proportionate, into solution design, transition, service delivery and continual service improvement. This includes identifying and implementing practical opportunities to improve energy and resource efficiency, extend the useful life of IT equipment, increase reuse, refurbishment and responsible end-of-life treatment, optimise workplace, cloud and data-centre infrastructure, and reduce avoidable travel through remote support, monitoring and automation.
Actions will take account of client objectives, applicable legal and contractual requirements, information security, service resilience, technical feasibility and commercial considerations. Responsibilities for agreed actions will be assigned to relevant account, service delivery or technical owners and reviewed through established client governance arrangements.
For applicable client engagements, Getronics will agree relevant qualitative objectives and quantitative measures in contracts, service management plans, service-level agreements or improvement programmes, subject to data availability and client approval. Indicators may include: energy consumption and energy-efficiency improvement; greenhouse gas emissions associated with in-scope services; the number and percentage of devices whose useful life is extended, redeployed, reused, refurbished or responsibly recycled; the quantity or weight of electronic equipment diverted from disposal; reductions in onsite interventions or business travel enabled by remote support; cloud or data-centre utilisation and resource-efficiency improvements; and the number and percentage of agreed sustainability actions completed by the target date. Baselines, organisational and service boundaries, calculation methods, data sources, owners and reporting periods will be documented for each agreed measure. Performance will be reviewed at least annually, and more frequently where specified in client governance arrangements, against agreed targets or year-on-year improvement objectives. Results, corrective actions and progress will be communicated through established service reviews or sustainability reporting. Getronics will retain reasonable supporting evidence, address material data gaps with clients, suppliers and partners, and ensure that reported benefits are transparent, traceable and limited to outcomes within its operational control or contractual influence, thereby avoiding unsupported environmental claims.
3.2.3.3. Transparency and Reporting
Transparency and Reporting refer to the way an organization creates access to proper disclosure of various financial as well as non-financial information, the consistency of data sources used to disclose as well as the reliability of data.
As a responsible corporate citizen, Getronics believes that open, honest engagement with its colleagues, investors, customers, vendors, and other stakeholders correlates to the long-term success and sustainability of the Group and strongly aligns with our values of authenticity, incorporating integrity, trust and honesty as core principles in all our activities.
Our management adopts a continuous improvement mindset in its pursuit of excellence and as a result continues to enhance and refine its systems, processes and reporting capabilities to develop robust data and business insights, which are underpinned by high standards of governance and internal control.
The Group maintains comprehensive risk registers at a consolidated group and regional level, including but not limited to commercial, legal, financial, tax and people risk.
The establishment of the Board, Executive Committee (ExCo), and Investment Committee ensures that a culture of strong governance, accountability and internal controls not only exists but is embedded throughout the organisation.
This culture and attitude to internal control is integral to the way that we compile, control and report data and other financial and non-financial information both internally and externally.
Such controls include:
- Regional CFOs, supported by qualified financial controllers, take accountability for their respective legal entity monthly.
- Regions have various key monthly controls including the review of results vs budget and prior months, key balance sheet account reconciliations and certain standard controls around key account risk areas (including revenue recognition).
- Most Getronics Group legal entities maintain their financial records on the SAP ERP system.
- The Group Financial Control team provides a monthly timetable to all regional finance teams.
- The use of the Hyperion Consolidation System is used to control the integrity of the financial consolidation process through an automatic upload file which ensures the integrity of information in the system.
- The Group Financial Control team conducts a thorough month-end review of the balance sheet and income statement for each region.
- Once the monthly review is completed, CFOs sign off the final monthly GL closure for their regions, while the Group CFO and Head of Group reporting signs off the consolidated results before reporting consolidated results to stakeholders.
Our approach to the management of our tax affairs is fully aligned with the Group’s wider commercial, reputational and business practices.
This consists of the following:
- Managing our tax affairs to protect shareholder value;
- Complying with applicable tax laws, rules, regulations and disclosure requirements wherever we operate;
- Paying the right amount of tax, at the right time, and in the right place around the world;
- Use incentives and reliefs only for the purposes intended;
- Only taking tax decisions which are with the wider objectives of the Group;
- To be constructive and transparent with tax authorities, based on the concepts of integrity, collaboration and mutual trust.
Given both the scale and different aspects of our business, risks will inevitably arise from time to time.
However, we effectively manage these risks in several distinct ways:
- The Group has appointed suitably qualified third-party tax advisers at the Group and jurisdictional level to ensure that it is abiding by the latest tax rules and regulations.
- In each business region we have suitably qualified Financial Controllers and CFO’s who ensure that our tax principles are upheld.
- Getronics takes a zero-tolerance approach to the facilitation of tax evasion in any form by its colleagues, agents, or associates of any kind.
- We ensure that key members of the finance organization and our tax advisers are involved in all stages of material and/or tax sensitive transactions.
- Material tax concerns are included in the overall Group risk register.
3.2.3.4. ESG Management
ESG Management refers to the way an organization governs ESG responsibilities, educates its staff, integrates ESG requirements into management practices, monitors ESG objectives and reinforces its ESG framework in the daily activity of the company.
Getronics ESG governance process involves several types of actors:
- Reporting Units Champions: Selected colleagues that are in each of our offices and data centers, who are delegated to report on the monitored ESG KPIs.
- ESG Team: ESG designated team whose objective is to monitor the completion of ESG objectives and implement the governance process.
- Executive Sponsors: representatives of the ESG agenda within the Board of Executives.
- Business Owners: Selected managers from different business areas, which fall under the ESG framework, who have the responsibility of completing ESG approved objectives in their own business area.
ESG Reporting Management Tooling
Getronics has implemented an automated reporting tool which facilitates access to sustainability and compliance data and enables regular reporting on ESG KPIs as well as auditable traceability of data.
The reporting tool facilitates:
- Data collection from offices and data centers (46 reporting units as on 31 December 2025)
- Designated users in each reporting unit or per function.
- ESG customized KPIs information collected on a regular basis
- The reporting tool facilitates real-time report extraction on a quarterly and yearly basis.
- Regular reassessment of suppliers
- Continuous updates related to legislation changes/ new trends/ new requirements / best practices/ reporting frameworks
Getronics will issue a regular annual ESG report to its stakeholders, covering the key findings, progress and performance against the disclosure topics presented within this policy.
3.2.3.5. Managing Systemic Risks from Technology Disruptions
Managing Systemic Risk from Technology Disruptions refers to the way an organization manages its infrastructure and the policies in place to minimize disruptions to services with the objective of being more resilient.
Getronics through its Business Continuity Management System (BCMS) is committed to minimizing the risk of business interruption through implementing processes, systems, and controls, as appropriate, and maintaining viable incident response, business continuity plans and security continuity to respond to potential business disruptions.
This Business Continuity Management System applies to Getronics’ internal business group’s data assets, information systems, networks, applications, locations, and people required for the delivery of such services. It also applies to the provision and support of services offered to external clients where Business Continuity (BC) and IT Service Continuity (ITSCM) are explicitly included as part of our contractual obligations.
Getronics’ Business Continuity Management System covers:
- Getronics Global Sites & Locations;
- Information Assets;
- Infrastructure Supporting Client;
- DR Provision for Client Systems;
- IT Service Continuity Management;
- Internal and Client Support Operation.
2.3 Reporting
We are committed to being transparent with our investors, shareholders, and other stakeholders about Getronics ESG initiatives, successes, and goals. Our ESG report provides updates regarding our ESG program firm-wide on an annual basis. We value regular, frequent engagement with our stakeholders on ESG matters.
Getronics monitors a wide range of Key Performance Indicators (“KPIs”), reflecting the main ESG disclosure topics described within this policy. In addition to our annual ESG repot, regular internal reporting will be provided on a quarterly / biannual basis to facilitate management decisions, allow debate on objective completion progress and discuss new initiatives within the ESG framework.